Bloc moteur embiellé: BSD444 AGZ000851473

Cylindre: 4 Cyl.
Etanchéité: joint à lèvre
(Note: Crank balancer gear has 78 teeth, and the gear set gears should have 39 teeth each.
3.3L Engine. This requires 9/16'' x 12 UNC Cylinder Head Bolts, the Earlier Engines were 1/2'' Cylinder Head Bolts so please check your bolt size before installation.)

Caractéristiques du produit

• Articles connexes : 65237,65297,65821,65827,65872,65978,65979,65997,66095,66484,66485,162722,168885
• Cylindre : 4 Cyl.
• Dents de vilebrequin : 78
• Livré avec : Engine Block Cam Bearing Set Crankshaft Main Bearings Con Rod Conrod Bearings Tappets Pistons Ring Set Camshaft
• Longueur de course : 4.4 inch
• Marque : Sparex
• Modèle moteur : BSD444
• Nombre de dents : : Crank balancer gear has 78 teeth, and the gear set gears should have 39 teeth each
• Remarques : Note: Crank balancer gear has 78 teeth, and the gear set gears should have 39 teeth each. 3.3L Engine. This requires 9/16'' x 12 UNC Cylinder Head Bolts, the Earlier Engines were 1/2'' Cylinder Head Bolts so please check your bolt size before installation.
• Taille boulon : 9/16
• Type de joint : Lip Seal
• Ø alésage (mm) : 111.78
• Ø alésage (po.) : 4.4