Lame à souder (Single Bevel) Dureté: 400-500Hb. AGZ000863508

Longueur: (A) 2500mm,
Largeur: (B) 200mm,
Épaisseur: (C) 20mm.

Caractéristiques du produit

• Dureté (HB) : 400-500
• Largeur (mm) : 200
• Longueur (mm) : 2500
• Matériau : Acier allié au bore
• Profil : Single Bevel
• Remarques : Procedure for welding your bucket strip. Please apply a 30 degree chamfer to the edge of the bucket strip and bucket wide enough to facilitate a good weld. Remove all residue from surfaces to be welded. Correctly assemble and clamp the bucket strip to the bucket. Types of electrodes to be used: Pre-heat to 300 degrees Celsius use electrode AWS-E7018 Pre-heat to 100 degrees Celsius use electrode AWS-E110-18G No pre-heat use electrode AWS-E307 or AWS-E312 Tack weld the bucket strip to the bucket in several positions before applying fillet weld. Please allow weld to cool naturally if possible - rapid cooling by the application of water for example, could cause thermal shock within the material leading to the weld and or bucket strip to crack. Please observe all health and safety rules and laws when carrying out this procedure.
• Épaisseur (mm) : 20